Billion BiPAC 645 User Manual download pdf (Page 6)

2.3 The rear ports

Power

(jack)

Connect the supplied power adapter to this jack

Console

(port)

Connect the supplied RS-232 cable to this port when connecting to a

PC’s RS-232 port (9-pin serial port).

ISDN So

(RJ-45 connector)

Connect an RJ-45 cable to this port when connecting to the ISDN.

LAN 1-4

(RJ-45 connector)

Connect an UTP Ethernet cable to this port when connecting to a

LAN such as an office or home network.

WAN

(RJ-45 connector)

Connect an UTP Ethernet cable to this port

when connecting to

the Internet or making other WAN connections

2.4 Cabling

Now you should be ready to connect your BIPAC-645 on your LAN and WAN or ISDN jacks. Follow

these steps to install:

•

Connect the router from EWAN port to an ADSL/cable modem, or attach the ISDN line to the ISDN

connector (S/T interface).

•

Connect the PC to the RJ-45 LAN connector. Two or more PCs can connect to a multi-port Hub first

and then uplink (cascade) port on the hub must be connected to LAN port.

•

Plug the power adapter into a wall outlet and into the AC connector on the back of BIPAC-645.

1 2 3 4 5 6 7 8 9 10 11 ... 81 82

No comments

Billion BiPAC 645 User Manual Page 6