Billion BiPAC 7001 User Manual

BiPAC 7001 ADSL USB Modem User’s Manual

5. Select “Yes, reboot the computer now”, than close the windows. 6. After restart the PC, window will show congratulation message and user can

7. After Billion ADSL USB Modem driver is successfully installed, you will see these 2 icons on your desktop. 9

3.1.2 For MAC OS 9/X： 1. Start Windows. Then insert the installation CD into the CD-ROM drive. In next window, click the driver installer. 2. Th

3. Input the user name and password of your Mac system. 4. The “License Agreement” screen will appear, then click “Accept”. 5. To click the t

6. When all necessary files have been copied, select “Restart now”, than close the windows. 12

3.1.3 For Linux: For Linux installation instructions, please refer to the text file provided with your Linux driver’s package. This driver support

3.2 Configuring the Network Properties--- LAN Adapter 3.2.1 Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View). In the Cont

4. Use the “Internet Protocol (TCP/IP) Properties” window to modify the IP address and DNS Server address as follow. 15

Change the IP address to a user defined address by selecting Use the following IP address and typing the address in the space provided. Change the

3.2.2 Configuring PC in Windows 2000 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections and

Chapter 1 ... 1 1.1 Introducing the BiPAC 7001...

3. Select Internet Protocol (TCP/IP) and click Properties 4. Use the “Internet Protocol (TCP/IP) Properties” window to modify the IP address and D

address and typing the address in the space provided. Change the DNS Server address to user defined addresses by selecting Use the following DNS ser

3.2.3 Configuring PC in Windows Me 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configurat

4. The “Gateway” tab allows you to add or remove gateway. Consult with your network administrator to determine the appropriate addresses for your in

3.2.4 Configuring PC in Windows 98 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and choose the Configurat

4. The “Gateway” tab allows you to add or remove gateway. Consult with your network administrator to determine the appropriate addresses for your in

3.2.5 Configuring PC in Linux: To enable LAN traffic over the ethernet interface: % ifconfig eth2 192.168.1.200 up You may also need to modify the ne

3.3 Configuring the Network Properties--- WAN Adapter 3.3.1 Configuring PC in Windows XP 1. Go to Start / Settings / Control Panel. In the Control Pa

4. From the Networking tab of the USB ADSL Properties window, select Internet Protocol (TCP/IP) and click Properties 26

5. The Internet Protocol (TCP/IP) Properties window is used to modify the IP addresses and DNS Server addresses. In this window, select either the Ob

Chapter 1 Introduction the BiPAC 7001 1.1 Introducing the BiPAC 7001 Billion’s BiPAC 7001 complies with ADSL standards and supports downstream rate of

6. Billion Dial-up PPP connection icon on the desktop. Then, the following window will appear. Enter the “User name” and “Password” provided by your

3.3.2 Configuring PC in Windows 2000 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections

4. From the Networking tab of the USB ADSL Properties window, select Internet Protocol (TCP/IP) and click Properties 5. The Internet Protocol (TCP/I

6. Billion Dial-up PPP connection icon on the desktop. Then, the following window will appear. Enter the “User name” and “Password” provided by your

3.3.3 Configuring PC in Windows Me 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2

4. The Internet Protocol (TCP/IP) Properties window is used to modify the IP addresses and DNS Server addresses. In this window, select either the Ob

5. Billion Dial-up PPP connection icon on the desktop. Then, the following window will appear. Enter the “User name” and “Password” provided by your

3.3.4 Configuring PC in Windows 98 1. Go to Start / Settings / Control Panel. In the Control Panel, double-click on Network and Dial-up Connections. 2

4. The Internet Protocol (TCP/IP) Properties window is used to modify the IP addresses and DNS Server addresses. In this window, select either the Ob

5. Billion Dial-up PPP connection icon on the desktop. Then, the following window will appear. Enter the “User name” and “Password” provided by your

1.3 Installing Billion ADSL USB Modem 2

3.3.5 Configuring PC in Linux: The PPP daemon (pppd) talks to the driver over TTY devices. Before the driver can be used, the devices /dev/ttyG0 and /

3.4 Information from your ISP Before configuring this device, you have to check with your ISP (Internet Service Provider) what kind of service is prov

Chapter 4 Configuration 4.1 Accessing communication settings Once the Billion BiPAC 7001 ADSL USB Modem and software have been installed, the comm

Make the necessary changes to the VPI/VCI, Encapsulation type and/or Modulation type and click Next> 3. The system has rebooted to have the new

4.2 Windows DSL Status Application The Billion ADSL USB Modem control panel program provides a quick and easy way to configure and check the performan

screen displays the release number of the ADSL USB Modem driver, and the DSL Status Application version you are currently using. (To show DSL data inc

4.3 MAC OS 9.x Control Panel Application 4.3.1 Control Panel： The Billion ADSL USB Modem control panel program provides a quick and easy way to config

4.3.2 Development Mode Development Mode is intended for OEM only. When in this mode, the Control Panel display Modem configuration information and

Click Retrain or Disconnect a connection for testing purposes. 3. The “System info” tab provides general information about the various software/firm

sent and received, and errors. 6. Click on the “DSL Advanced” tab to view more advanced statistics. Local/Remote Attenuation: The extent of the

Chapter 2 Installing the BiPAC 7001 2.1 Important note for using the BiPAC 7001  Do not use the BiPAC 7001 in high humidity or high temperatures.

the interleaved data stream. FEC-Fast: Count of local and remote FEC (Forward Error Correction) errors for the fast data stream. CRC-Interleaved: Co

4.4 MAC OS X Control Panel Application. 4.4.1 Control Panel 1. Access the modem Control Panel on your Macintosh (Go Applications DSL MODEM ADSL US

4.4.2 Development Mode Development Mode is intended for OEM only. When in this mode, the Control Panel display Modem configuration information and

Click Retrain or Disconnect a connection for testing purposes. 3. The “System info” tab provides general information about the various software/fir

5. The “ATM” tab provides transmission statistics such as the number of cells or packets sent and received, and errors. 6. Click on the “DSL Adv

Local/Remote Attenuation: The extent of the local/remote attenuation expressed in decibels (dB) Local SNR Margin: The signal to noise ratio margi

Chapter 5 Uninstall Remove the BiPAC 7001 ADSL USB Modem software drivers by performing the following steps. 1. The USB cable should not be un

3. You will be reminded into to unplug the USB cable until the uninstall process has been completed. Then click OK> 4. A message will be disp

56

5.2 Uninstall MAC OS: 1. Invoke the Uninstaller from the DSL Modem folder (Application -> BiPAC 7001 ADSL USB Modem ->Uninstall) 2. The “Unins

2.3 The Front LEDs 2.4 The Rear Ports Port Meaning 1 USB Connect the supplied USB cable to this port when connecting to the PC 2 LINE Connect

58

5.3 Uninstall Linux: To unload an unused module: % rmmod ./GSPNModem (Command to be executed from directory monaco_linux/ModemDrv) You may need to ex

2.5 Cabling Through USB Port The product can be used as a Network Adapter on your PC. That means you do not have to install a network adapter first on

Chapter 3 Basic Installation 3.1 Installing the USB Driver on PC 3.1.1 For Windows 1. Insert the CD into your computer’s CD Rom drive. Th

2. Choose service provider from the list below and then click “Next” to continue. 3. Then click “Next”. 4. Please plug USB cable into ADSL USB