Billion BiPAC 5100 User Manual download pdf (Page 24)

Network Address

Translation

This option is available if you select Routing in the Mode field.

Select None, SUA Only or Full Feature from the drop-sown list box. Refer to the

NAT chapter for more details.

Back

Click Back to go back to the first wizard screen.

Click Next to continue to the next wizard screen.

3.11 DHCP Setup

DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual

clients to obtain TCP/IP configuration at start-up from a server. You can configure the

BIPAC-5100/5100W as a DHCP server or disable it. When configured as a server, the

BIPAC-5100/5100W provides the TCP/IP configuration for the clients. If you turn DHCP

service off, you must have another DHCP server on your LAN, or else the computer must be

manually configured.

3.11.1 IP Pool Setup

The BIPAC-5100/5100W is pre-configured with a pool of 100 IP addresses starting from

192.168.1.100 to 192.168.1.199 for the client machines.

3.12 Wizard Setup Configuration: Third Screen

Verify the settings in the screen shown next. To change the LAN information on the

BIPAC-5100/5100W, click Change LAN Configurations. Otherwise click Save Settings to save

the configuration and skip to section 3.13.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 85 86

No comments

Billion BiPAC 5100 User Manual Page 24