Billion BIPAC 3013G User Manual

BiPAC 3013G 54Mbps 802.11g Wireless USB Adapter User Manual

9 7. Select “No, not this time” and click the “Next” button. 8. Select “Install the software automatically” and then click the “Next” bu

10 9. Click the “Finish” button to complete installation.

11 Management Guide Read this chapter to understand the management interface of the device and how to manage the device. Making a Basic Network Co

12 To use this adapter in Ad-Hoc Mode 1. Double click the icon on your desktop. 2. Click the “Available Network” button to scan available wir

13 on the “Network Authentication” drop list to select an authentication method, and then select a “Data encryption” type. Fill in each required blan

14 To use this adapter in Infrastructure Mode: 1. Double click the icon on your desktop. 2. Click the “Available Network” button to scan availab

15 Note: This example is an open wireless network. If you are going to connect to an AP with security protection, you will have to configure the en

16 General After starting the utility, the general page pops up This General tab provides the information of your current wireless network connectio

17 Profile The Profile tab lists the preferred connections. You can click the buttons beside to do configure each connection. Add Click this bu

18 Available Network This available tab lists the reachable wireless network of this adapter. Refresh Click this button to rescan available

1 FCC Certifications Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for

19 Advanced This Advanced tab provides advanced configurations to this adapter. Every modification in this tab will be performed after clic

20 802.11b Preamble Mode Select the preamble mode to be long, short or auto detection mode. Region Domain Select your region from the drop list. Pl

21 Statistics See this tab to show the transmission activity record. Clicking the “Reset” button recounts the values from zero.

22 Wi-Fi Protected Setup This page provides users to connect this device with routers or AP with PIN number or PBC mechanism. Click on the PIN or PB

23 Appendix RT-Set Setup Wizard For Windows 2000 and XP users to connect to a wireless network easily, we also provide the RT-Set setup wizard to

24 2. The RT-Set scans the available AP within your LAN. Those AP are listed with their SSID. Click the wireless AP that you are going to connect wi

25 5. Configure the IP address for connecting to the network. You may choose “Use the following IP address” to fill in IP addresses manually or choo

26 Connect to a wireless network in ad hoc mode 1. To connect this adapter to another computer, select the “Station (ad hoc)” mode and click the “N

27 3. The “unsecured network” window may pop up if the adapter you select doesn’t use security encryption settings. Click the “OK” button after you

28 5. Configure the IP address for connecting to the wireless adapter. You may choose “Use the following IP address” to fill in IP addresses manuall

2 CE Mark Warning This equipment complies with the requirements relating to electromagnetic compatibility, EN 55022 Class B for ITE, the essentia

29 Use this adapter as an AP 1. To use this adapter as an AP (access point), select the “AP” mode and click the “Next” button to proceed. 2.

30 3. Assign an SSID for this AP, which is the name that is going to be identified while other wireless devices scan for available network. Choose t

31 5. Click “Finish” to complete setup.

32 AP mode management guide General After configuring the adapter in AP mode, this “General” page shows up, which shows the general information of t

33 Advanced Beacon Interval: Define the interval between beacons from 20~1000 DTIM Period: Set the DTIM period between 1~255 Preamble Mode: Click

34 SoftAP This page allows users to select the adapter for connect to public network. Please click on the device that are used for connecting to p

35 Product Specification Standard IEEE 802.11b, IEEE 802.11g Interface USB rev1.0/1.1/2.0 Security 64/128-bit WEP, WPA (TKIP with IEEE 802.1x), AES

3 TABLE OF CONTENTS OVERVIEW... 4 UNPACKING INFORMATION...

4 Overview Thank you for purchasing this product. Read this chapter to know about your BiPAC 3013G 54Mbps 802.11g Wireless USB Adapter. Unpacking

5 Key Features  Complies with IEEE 802.11b/g wireless standard  Support driver for Windows2000, XP 32/64 bit and Vista 32/64 bit 

6 Installation Guide Software Installation Note: The following driver installation guide uses Windows XP as the presumed operation system. The pro

7 1. The language-selecting window pops up. Please select the language you use and click OK. 2. The welcome window pops up. Click the “Next” but

8 4. Click the “Finish” button to complete driver and utility installation. 5. For Windows XP and 2000 users, please insert this USB wirele