Billion BiPAC 7401VGP User Manual download pdf (Page 84)

ADSL Mode

Connect Mode: This mode will automatically detect your ADSL line code, ADSL2+, ADSL2,

AnnexM2 and AnnexM2+, ADSL, All. Please keep it as the factory setting unless ADSL is detected

as the symptom of synchronization problem.

Modulation: It will automatically detect the capability of your ADSL line mode. Please use the

factory setting unless ADSL is detected as the symptom of synchronization problem.

Profile Type: Please keep the factory settings unless ADSL is detected as the symptom of low link

rate or unstable problems. You may need to change the profile setting to reach the best ADSL line

rate, it depends on the differences of DSLAM and location.

Activate Line: When set to false, the system will abort the ADSL line connection. When set to true,

the system will reconnect the ADSL line.

Coding Gain: It reduces router’s transmit power which will effect to router’s downstream

performance. Higher the gain will increase the downstream rate but it sometimes causes unstable

ADSL line. The configurable ADSL coding gain is from 0 dB to 7dB, or automatic.

Tx Attenuation: It is the amount of power that modem (upstream) or DSLAM (downstream) is using.

The lower the power the better the performance will be in modem upstream.

Elapsed Time: This is the ADSL connection uptime.

1 2 ... 79 80 81 82 83 84 85 86 87 88 89 ... 156 157

No comments

Billion BiPAC 7401VGP User Manual Page 84